IAQ.net Resources

EPA Moisture Control Guide 2013

Issue link: https://hi.iaq.net/i/248503

Contents of this Issue

Navigation

Page 29 of 144

www.epa.gov/iaq/moisture Sheet Metal and Air Conditioning Contractors' National Association. 1985. SMACNA Air Duct Leakage Test Manual. Virginia. Sheet Metal and Air Conditioning Contractors' National Association. (A companion to HVAC Duct Construction Standards – Metal and Flexible, this manual contains duct construction leakage classification, expected leakage rates for sealed and unsealed ductwork, duct leakage test procedures, recommendations on use of leakage testing, types of test apparatus and test set-up and sample leakage analysis.) United States Environmental Protection Agency. 2006 Construction Site Storm Water Runoff Control. Washington, D.C.: United States Environmental Protection Agency. (This resource provides detailed information on constructionphase storm water management, including best management practices.) United States Environmental Protection Agency. 2006. National Menu of Storm Water Best Management Practices. Washington, D.C.: United States Environmental Protection Agency. (This resource provides detailed information including applicability, design criteria, limitations and maintenance requirements on these and many other site drainage methods.) Sheet Metal and Air Conditioning Contractors' National Association. 1993. Architectural Sheet Metal Manual – Fifth Edition. Virginia. Sheet Metal and Air Conditioning Contractors' National Association. (The SMACNA Architectural Sheet Metal Manual provides design criteria and details for roof drainage systems, gravelstop fascia, copings, flashing, building expansion, metal roof and wall systems, louvers and screens and other metal structures. Chapter 1 contains data, calculations, and charts for designing roof drainage systems.) United States Environmental Protection Agency. 2006.Porous Pavement. Post-Construction Storm Water Management in New Development and Redevelopment. http://cfpub.epa.gov/npdes/stormwater/menuofbmps/index. cfm?action=min_measure&min_measure_id=5. Accessed November 6, 2013. United States Environmental Protection Agency. 2001. Managing Storm Water to Prevent Contamination of Drinking Water. Source Water Practices Bulletin. EPA 816-F-01-020. Environmental Protection Agency. http://www.epa.gov/safewater/sourcewater/pubs/fs_swpp_ stormwater.pdf. Accessed November 6, 2013. Spray Polyurethane Foam Alliance. 2003. Spray Polyurethane Foam for Exterior Subgrade Thermal and Moisture Protection. Virginia: Spray Polyurethane Foam Alliance. (A technical guide to specifying closed-cell spray foam polyurethane on the outside of basement walls as thermal insulation and moisture protection.) Straube, John. 2011. High Performance Building Enclosures. Somerville, MA: Building Science Press (This book includes the fundamentals underpinning the physics of heat, air and moisture control in high-performance building enclosures and practical design guidance to achieve them for a wide array of enclosure assemblies in all North American climate zones.) Water Management Committee of the Irrigation Association. 2010 Turf and Landscape Irrigation: Best Management Practices. Irrigation Association. WUFI: Hygrothermal modeling software to assess the water vapor dynamics of wall and roof systems in numerous climates. WUFI is available from the Fraunhofer Institute of Building Physics http://www.hoki.ibp.fraunhofer.de/ in Germany and Oak Ridge National Laboratory http://www.ornl.gov/sci/ btc/apps/moisture/. Accessed November 6, 2013. ORNL conducts training for using WUFI. Texas Water Development Board. 2005. The Texas Manual on Rainwater Harvesting. Texas: Texas Water Development Board. http://www.twdb.state.tx.us/innovativewater/rainwater/ docs.asp. Accessed November 6, 2013. (This manual presents a discussion on the history of rainwater collection, harvesting system components, water quality and treatment, system sizing and best management practices.) United States Environmental Protection Agency. 2006. Alternative Pavers (Post-Construction Storm Water Management in New Development and Redevelopment). Washington, D.C.: United States Environmental Protection Agency. http://cfpub1.epa. gov/npdes/stormwater/menuofbmps/index.cfm?action=min_ measure&min_measure_id=5. Accessed November 6, 2013. (This resource is intended to provide guidance on the types of practices that could be used to develop and implement storm water management programs.) 23

Articles in this issue

Links on this page

Archives of this issue

view archives of IAQ.net Resources - EPA Moisture Control Guide 2013