Issue link: https://hi.iaq.net/i/248503
www.epa.gov/iaq/moisture Acknowledgements The United States Environmental Protection Agency, Office of Radiation and Indoor Air, Indoor Environments Division would like thank the many professionals who contributed to this document, including Terry Brennan and Michael Clarkin of Camroden Associates and Lew Harriman of Mason-Grant Consulting. The Agency would also like to thank Christopher Patkowski for permission to use the photograph of water droplets on the front and back covers. The figures in this document came from several sources: yy Terry Brennan provided the photographs used in Figures 1-1 to 1-14. yy Christopher Patkowski created Figures 1-15, 1-16 and 2-14 based on illustrations in the Whole Building Design Guide (www.wbdg.org), a program of the National Institute of Building Sciences. yy Terry Brennan drew Figure 1-17 and provided the spreadsheets used to create Figures 1-18 and 1-19. He also provided the photograph for Figure 1-20. yy Christopher Patkowski created Figure 2-1. He also created Figures 2-2 to 2-4, Figures 2-6 and 2-7, and Figures 2-9 to 2-12 based on illustrations provided by Joe Lstiburek of Building Science Corporation. yy The U.S. Department of Energy provided the map in Figure 2-5. yy Christopher Patkowski drew Figure 2-8 based on an illustration in a publication of the Canadian Mortgage and Housing Corporation. He also drew Figure 2-13. yy Terry Brennan drew Figures 2-15 and 2-16. yy Lew Harriman provided Figure 2-17. yy Terry Brennan provided Figure 4-1 and drew Figures A-1 to A-3. yy Christopher Patkowski drew Figures D-1 to D-3 based on drawings by Terry Brennan. yy Figure G-1 was provided by the National Institute of Occupational Safety and Health (NIOSH). vi